PlastiDip Multi-Purpose Rubber Coating (Glossy Black) - Authorised Agent - 100% Authentic - No.1 Rubber Coating - No Need for Separate Gloss Top Coat - Flexible, Won't Crack, Chip or become Brittle - Peelable (Easy to Remove when You want to) - Resists Weather, Chemicals, Impact and Abrasion - Plasti Dip Glossy Spray provides a Gloss Black finish without the need for a separate Gloss Top Coat. - Plasti Dip is a synthetic rubber based coating that's perfect for do-it-yourself projects around the home, garage, garden or shop. -Plasti Dip is used widely for coating wheels; and painting graphics that can be peeled off without affecting the underlying finish*. - Plasti Dip can be used to coat wood, metal, glass, rope, plastic, rubber, concrete, tools, and just about anything else you can think of. Benefits: Protects coated items against moisture, acids and corrosion Provides a non-slip, comfortable and controlled grip Remains flexible, stretchy and will not crack or become brittle in extreme weather conditions Provides protection against electrical shock, vibration, heat and deadens sound Easy to remove from most surfaces when ready to return to original surface HOW TO SPRAY - Spraying (11 oz. aerosol) Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying. Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance. Allow 30 minutes minimum between coats. Apply as many coats as desired (3-4 average). Allow 4 hours minimum dry time before use. Coverage: Approximately 5-10 sq. ft. per can. Spraying Tips: Always protect surrounding areas from overspray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired. Distributed by: Spectrum Automotive Pte Ltd Local Authorized Distributor Items are 100 % Authentic Contact us: info@spere.com.sg