Multi Grip is a clear, flexible general purpose adhesive ideal for household, craft and hobby use.
Features:
- All-purpose glue which bonds most materials
- Dries clear
- Flexible
- Instant bonding (by contact method)
- Fast drying
- Water-resistant
- Grabs in minutes – the exact ‘grab time’ depends on the surfaces to be joined
Where can this product be used?
- Bonds metal – jewellery, toys, etc.
- Plastics – toys, dolls, etc.
- Canvas – deck chairs, tents, etc.
- Timber – models, toys, etc.
- Fabric
What materials is this product suitable for?
- Metal
- Plastics
- Canvas
- Timber
- Fabric
Directions of use:
1. Remove all dirt, dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail. Replace nozzle.
2. Squeezing gently, apply an even coating of Multi Grip to both surfaces to be joined*. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved on contact by waiting approx 1 minute before pressing parts together firmly.)
3. Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
4. Replace cap firmly on tube for storage.
*For very porous surfaces, apply a thin coating of Multi Grip to both surfaces and allow to dry (approx 5 minutes). Apply Multi Grip again and treat as above.
Limitations:
- Highly flammable.
- Will not bond Teflon, Polyurethane, Polyethylene and Polypropylene plastics. Polyethylene and Polypropylene are used to make many household utensils and children's toys.
- Do not use for bonds requiring heat resistance above 90°C.
- Will damage foam polystyrene.