Selleys All Fix is a solvent free, high strength adhesive with instant (fast) grab* on porous surfaces that eliminates the need for nails and screws in many jobs. It has a thick, non-runny consistency that will bond a wide variety of materials.
Features:
- Instant grab* on porous surfaces
- High final strength
- Correctable within 5-10 minutes
- No solvent fumes, safe and easy to use
- Non-flammable
- Fills minor gaps on uneven surfaces (bridges gaps up to 10mm)
*Instant grab may not support very heavy items, particularly on uneven surfaces or smooth non-porous surfaces. In these cases, temporary support will be required until adhesive dries.
Where can this product be used?
- Skirting boards
- Architraves
- Plasterboard
- Wall panelling
- Chair (dado) rails
- Cabinets
- Plaster coving
- Carpet and carpet grippers
What materials is this product suitable for?
- Wood
- Particle board
- Metals
- Glass
- Ceramics
- Brick
- Concrete
- Cork
- Polystyrene foam
- UPVC
- Many rigid plastics
- Cleans up easily with water while still wet
- Overpaintable
Directions of use:
1. Surfaces to be bonded must be dry, sound and free from grease/oil and dust.
2. Unscrew cap and squeeze contents out onto desired surface.
3. Form bonds immediately by pressing parts firmly together. Bonds can be re-positioned within 5-10 minutes after forming.
Limitations:
- Not suitable for bonding plastics such as polyethylene, polypropylene, other flexible plastics and rubbers.
- Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
- Warped panels may need holding or nailing until adhesive dries.
- Not resistant to strong acids and strong organic solvents.
- In cold or damp weather and between non-porous materials, drying time is greatly extended.
- Do not apply below 10°C.
- Thick applications take longer to dry than thin applications.
- Not suitable for fixing mirrors.
- Not suitable for sanding.
- Do not store below 0°C.
- Instant grab may not support very heavy items, particularly on uneven surfaces or smooth non-porous surfaces. In these cases, temporary support will be required until adhesive dries.
- When used near brass or copper, the immediate area of contact will discolour to a blue tone.
- Selleys All Fix can stain slightly and colour can be paler than surrounding area, squeeze out should be wiped off to prevent stains.